Bercomac 700416 Bedienungshandbuch PDF herunterladen (Seite 16)

ASSEMBLY

Attach the snowblower to the front frame as shown.

Make sure the snowblower’s hitch is pushed in until

locked into place by the springs (item 1).

Connect the driveline to the tractor’s P.T.O. spline shaft.

Make sure that the yoke is securely attached to the

tractor’s P.T.O.

DANGER

ANY CONTACT WITH THE ROTATING

DRIVELINE MAY CAUSE DEATH

KEEP AWAY AND NEVER OPERATE WITHOUT:

All extension guards for the tractor and the

driveline in place.

The driveline securely attached at both ends.

DANGER

Do not operate without driveline completely

covered by the extension guard.

If the driveline is not completely covered, be sure

an extension guard is installed.

Make sure the chain guard is in place and attached

with the rubber latch.

Adjust the extension guard so that it is parallel with

the driveline and tighten the bolts firmly.

Make sure the extension guard does not touch

anywhere particularly when the snowblower is raised.

Attach the snowblower to front frame

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 55 56

Keine Kommentare

Bercomac 700416 Bedienungshandbuch Seite 16